User guide

The Update Phones shows the type of query that you chose. If you want to change the type of query, click

Back.

Step 2

Choose the Logout Users before Update check box to log out the users prior to the update.

You can also use this option to bulk log out users if no fields are chosen.

Step 3

Specify the setting that you want to update for all the records that you have defined in your query or custom

file. You can choose multiple parameters to update. See the Table 5: Field descriptions for Update Phones,

on page 120 for descriptions of parameters.

Step 4

Select the update check box to the left of the field that you want to update.

This tells BAT to overwrite the existing value for the field.

Be aware that BAT updates only those fields for which you have selected the update check

box.

Note

Step 5

In the Value field for the checked parameter, enter the new value or choose a value from the list box.

Step 6

In the Reset/Restart Phones area, check one of the following choices:

• Don't Reset/Restart phones/Apply Config—To reset/restart devices at a later time.

• Reset phones—To reset (power-cycle) the phones

• Restart phones—To reset phones without power-cycling

• Apply Config—To reset only the settings that have changed since the last reset

Step 7

Update the required phone parameters. See Table 5: Field descriptions for Update Phones, on page 120 for

field descriptions.

Step 8

To create a job for updating the records, click Submit.

Use the Job Scheduler option in the Bulk Administration main menu to schedule and activate this job.