User guide

DescriptionField
Enter the partition to which the directory number belongs. Make sure that the
directory number that you enter in the Intercom Directory Number field is unique
within the partition that you choose.
The directory number can appear in more than one
partition.
Note
Intercom Route Partition
Enter a description of the directory number and route partition.Description
Enter a name that you want to display on the phone of the caller.
This setting, which supports the Identification Services for the QSIG protocol,
applies to shared and nonshared directory numbers.
Alerting Name
This field provides the same information as the Alerting Name field, but you
must limit input to ASCII characters. Devices that do not support Unicode
(internationalized) characters display the content of the Alerting Name ASCII
field.
Alerting Name ASCII
Intercom Directory Number Settings
Enter the appropriate calling search space. A calling search space comprises a
collection of partitions that are searched for numbers that are called from this
directory number. The value that you choose applies to all devices that are using
this directory number.
Calling Search Space
Enter a Presence Group for this directory number. The selected group specifies
the devices, end users, and application users that can monitor this directory
number.
Intercom Presence Group
Leave this field blank to have the system display the extension.
Use a maximum of 30 alphanumeric characters. Typically, use the user name or
the directory number (if using the directory number, the person receiving the call
may not see the proper identity of the caller).
Intercom Display
This field provides the same information as the Display (Internal Caller ID) field,
but you must limit input to ASCII characters. Devices that do not support Unicode
(internationalized) characters display the content of the ASCII Display (Internal
Caller ID) field.
Intercom ASCII Display
Use this field only if you do not want the intercom directory number to show on
the line appearance. Enter text that identifies this directory number for a line/phone
combination.
Intercom Line Text Label
This field provides the same information as the Intercom Line Text Label field,
but you must limit input to ASCII characters. Devices that do not support Unicode
(internationalized) characters display the content of the Intercom Line Text
Label ASCII field.
Intercom Line Text Label ASCII
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
102 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL