User guide

DescriptionField
This parameter determines the number of seconds that Cisco Unified
Communications Manager waits before prompting the user to retrieve a call that
the user parked. This timer starts when the user presses the Park softkey on the
phone, and a reminder is issued when the timer expires.
Default: 60 seconds
If you configure a non-zero value, this value overrides the value of this parameter
set in the Service Parameters window. However, if you configure a value of 0
here, then the value in the Service Parameters window will be used.
Park Monitor Reversion Timer
This field allows you to turn this feature on or off. Enter ‘T’ to enable Cisco
Unified Communications Manager to log missed calls in the call history for that
directory number on the phone. Enter ‘F’ to disable this feature.
Log Missed Calls
Enter a directory URI to associate with the directory number for this phone.
Follow the username@host format. Enter a username of up to 47 alphanumeric
characters. For the host address, enter an IPv4 address or fully qualified domain
name. You can associate up to five directory URIs to a single directory number.
Within Cisco Unified CM Administration, you can enter directory URIs
with embedded double quotes or commas. However, when you use Bulk
Administration to import a csv file that contains directory URIs with
embedded double quotes and commas, you must use enclose the entire
directory URI in double quotes and escape the embedded double quotes
with a double quote. For example, the Jared, "Jerry",[e-mail]
directory URI must be input as "Jared,""Jerry"",[e-mail]" in the
csv file.
Note
URI (1-5) on Directory Number
Enter the partition on which the directory URI belongs. If you do not want to
restrict access to the directory URI, leave the field blank.
URI (1-5) Route Partition on Directory Number
Enter a 't' (True) to indicate that this directory URI is the primary directory URI
for this extension. Otherwise, enter an 'f' (False) to indicate that this is not the
primary directory URI for this extension.
You can associate up to five directory URIs to a single directory number,
but you must select a single primary directory URI.
Note
URI (1-5) Is Primary on Directory Number
Intercom Fields (Optional)
Enter a dialable phone number. Values can include numeric characters and route
pattern wildcards and special characters except for (.) and (@).
The directory number that you enter can appear in more than one partition.
At the beginning of the directory number, enter \+ if you want to use the
international escape character +. For this field, \+ does not represent a wildcard;
instead, entering \+ represents a dialed digit.
Intercom Directory Number
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 101
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL