User guide

DescriptionField
Enter the setting to use instead of the external phone number mask to determine
the AAR Destination to be dialed.
AAR Destination Mask
Enter the directory number to which an unregistered internal call is forwarded
when the line is in use.
This setting applies to any internal, dialable phone number and to all devices that
are using this directory number.
Forward Unregistered Internal Destination
Enter the calling search space to use when unregistered internal calls are forwarded
to the specified destination.
This setting applies to all devices that are using this directory number.
Forward Unregistered Internal CSS
Enter the directory number to which an external call is forwarded when the line
is in use.
This setting applies to any dialable external phone number, including an outside
destination unless restricted, and to all devices that are using this directory number.
Forward Unregistered External Destination
Enter the calling search space to use when external calls are forwarded to the
specified destination.
This setting applies to all devices that are using this directory number.
Forward Unregistered External CSS
Use this field to configure an audible message waiting indicator policy. Enter
one of the following options:
• Off
• On—When you enter this option, you will receive a stutter dial tone when
you take the handset off hook.
• Default—When you enter this option, the phone uses the default that was
set at the system level.
Audible Message Waiting Indicator Policy
This field determines the type of notification an incoming call sends to members
of a call pickup group. If the called phone does not answer, the phones in the call
pickup group that are idle will either hear a short ring (ring once) or hear nothing
(disabled).
• Use System Default—The value of this field gets determined by the setting
of the Cisco CallManager service parameter Call Pickup Group Audio Alert
Setting of Idle Station.
• Disable—No alert is sent to members of the call pickup group.
• Ring Once—A short ring is sent to members of the call pickup group.
Call Pickup Group Audio Alert Setting (Phone
Idle)
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
98 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL