User guide

DescriptionField
For this required field, enter one of the following values:
• Internal
• External URLs
• Both
• Default: Internal
Services Provisioning
Enter one of the following values:
• Disabled—None of the personalization settings on the phone get activated.
• Enabled—This setting accepts a personalized background image file, which
is used for the phone screen; it accepts a preview image file for temporary
display; and it accepts a personalized tone file, so the default ring tone can
be personalized.
• Default—Use the phone personalization setting that is in the Common
Phone Profile.
Phone Personalization
Enter a name that identifies the remote destination.Mobility Identity Name
Enter the telephone number for the destination. Include the area code and any
additional digits that are required to obtain an outside line. Maximum field length
equals 24 characters; individual characters can take the values 0-9, *, and #. Cisco
recommends that you configure the caller ID of the remote destination.
Add the necessary translation pattern or route patterns to route the destination
number.
Mobility Identity Destination Number
Enter the minimum time in milliseconds that must pass before the mobile phone
can be answered.
Range: 0 - 10,000 milliseconds
Default: 1,500 milliseconds
Mobility Identity Answer Too Soon Timer
Enter the maximum time in milliseconds that can pass before the mobile phone
must be answered.
Range: 10,000 - 300,000 milliseconds
Default: 19,000 milliseconds
Mobility Identity Answer Too Late Timer
Enter the time that elapses before the mobile phone rings when a call is transferred
from the desktop phone.
Range: 0 - 30,000 milliseconds
Default: 4,000 milliseconds
Mobility Identity Delay Before Ringing Cell
Enter a time-of-day access record to associate with this remote destination.Mobility Identity Time of Day Access
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 91
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL