User guide

DescriptionField
Choose the appropriate location for this phone. A location setting of Hub_None
means that the locations feature does not keep track of the bandwidth that this
phone consumes.
Location
Enter the appropriate expansion module or none.Module 1
Enter the custom software for the appropriate expansion module, if applicable.
The value that you enter overrides the default value for the current model. Ensure
the firmware load matches the module load.
Module 1 Load Name
Enter the appropriate expansion module or none.Module 2
Enter the custom software for the second expansion module, if applicable.
The value that you enter overrides the default value for the current model. Ensure
the firmware load matches the module load.
Module 2 Load Name
Enter the phone template name that you created for this type of bulk transaction.Phone Template
Enter the URL that the phone uses to validate requests that are made to the phones
web server. If you do not provide an authentication URL, the advanced features
on the Cisco Unified IP Phones that require authentication will not function.
Leave this field blank to accept the default setting.
By default, this URL accesses a Cisco Unified IP Phone User Options window
that was configured during installation.
Authentication Server
Enter the host and port (for example, proxy.cisco.com:80) that are used to proxy
HTTP requests for access to non-local host addresses from the phones HTTP
client.
If the phone receives a URL such as www.cisco.com in a service and the phone
is not configured in the cisco.com domain, the phone uses the proxy server to
access the URL. If the phone is configured in the cisco.com domain, the phone
accesses the URL without using the proxy because it is in the same domain as
the URL.
Proxy Server
Enter the URL of the XML service that will appear as the idle display on the
Cisco Unified IP Phone LCD screen when the phone has not been used for the
time that is specified in the Idle Time field.
For example, you can display a logo on the LCD screen when the phone has not
been used for 5 minutes.
Idle
Enter the seconds that you want to elapse before the phone displays the URL that
is specified in the Idle field.
Idle Timer
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
86 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL