User guide

DescriptionField
Used with digest authentication (SIP security), choose an end user that you want
to associate with the phone.
Ensure that you configured digest credentials for the user that you choose, as
specified in the End User Configuration window.
After you save the phone configuration and reset the phone, the digest credentials
for the user get added to the phone configuration file.
For more information on digest authentication, refer to the Cisco Unified
Communications Manager Security Guide.
Digest User
Enter the profile that a phone should load when an extension mobility user logs
out. You must configure logout profiles in Cisco Unified Communications
Manager Administration.
Use Current Device Setting—This choice creates an autogenerated device profile
as the default device profile.
Select a User Device Profile—This choice assigns a user device profile, which
has already been defined, that becomes the default device profile for this device.
The chosen user device profile gets loaded onto the device when no user is logged
in.
Log Out Profile
Enter the codec to use if a media termination point is required for SIP calls.SIPCodec_MTPPreferredOrigCodec
If required, enter the appropriate SIP dial rule. SIP dial rules provide local dial
plans for Cisco Unified IP Phones 7905, 7912, 7940, and 7975 that run SIP, so
users do not have to press a key or wait for a timer before the call gets processed.
Leave the SIP Dial Rules field set to <None> if you do not want dial rules applied
to the IP phone that is running SIP. This means the user must use the Dial softkey
or wait for the timer to expire before the call gets processed.
Dial Rules
Enter a calling search space to use for rerouting.
The system uses the rerouting calling search space of the referrer to find the route
to the refer-to target. When the Refer fails due to the rerouting calling search
space, the Refer Primitive rejects the request with the “405 Method Not Allowed”
message.
The redirection (3xx) primitive and transfer feature also uses the rerouting calling
search space to find the redirect-to or transfer-to target.
CSS Reroute
Enter the common phone configuration to which you want this phone assigned.
The common phone configuration includes the attributes (services or features)
that are associated with a particular user.
Common Phone Configuration
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
84 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL