User guide

DescriptionField
Enter a hexadecimal value for the MLPP domain that is associated with this
device. Ensure that this value is blank or a value between 0 and FFFFFF
MLPP Domain
If available, this setting specifies whether a device that is capable of playing
precedence tones will use the capability when it places an MLPP precedence call.
• Default—This device inherits its MLPP indication setting from its device
pool.
• Off—This device does not handle nor process indication of an MLPP
precedence call.
• On—This device does handle and process indication of an MLPP precedence
call.
MLPP Indication
If available, this setting specifies whether a device that is capable of preempting
calls in progress will use the capability when it places an MLPP precedence call.
• Default—This device inherits its MLPP indication setting from its device
pool.
• Off—This device does not handle nor process indication of an MLPP
precedence call.
• On—This device does handle and process indication of an MLPP precedence
call.
MLPP Preemption
Enter the mode that you want to set for signal packet capture:
• None—Choose None if you do not want to specify a mode.
• Real-Time Mode—Use this mode for real-time signal packet capture.
• Batch Processing Mode—Use this mode for batch processing signal packet
capture mode.
Signal Packet Capture Mode
Enter the time for packet capture in minutes. You can enter a maximum duration
of 300 minutes.
Packet Capture Duration
Enter a numeric string that contains 4 to 10 digits. To install, upgrade, or
troubleshoot a locally significant certificate, the phone user or administrator must
enter the authentication string on the phone.
Authentication String
Enter Yes or No to configure call display restrictions on a call-by-call basis.
When this check box is checked, Cisco Unified Communications Manager ignores
any presentation restriction that is received for internal calls.
Ignore Presentation Indicator
Enter the default SIP profile or a specific profile that was previously created. SIP
profiles provide specific SIP information for the phone such as default telephony
event payload type, registration and keep alive timers, media ports, Iris, and
dynamic DNS server addresses.
SIP Profile
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 83
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL