User guide

BAT template field descriptions to add Intercom template
The following table provides descriptions of all possible fields that display when you add an Intercom template
in a BAT phone, gateway, or UDP template. Some device types do not require all the phone settings. Only
some fields show the values that were configured in Cisco Unified Communications Manager Administration.
Field names that have an asterisk in the BAT user interface require an entry. Treat fields that do not have an
asterisk as optional.
Table 3: Field descriptions for adding an Intercom template to a BAT template
DescriptionField
Intercom Directory Number Information
Enter a unique name for the intercom template.Intercom Template Name
Choose a route partition to which the directory number belongs.
The directory number can appear in more than one
partition.
Note
Route Partition
Enter a description of the directory number and route partition. The
description can include up to 50 characters in any language, but it
cannot include double-quotes (""), percentage sign (%), ampersand
('), or angle brackets (<>).
Description
Use this field only if you do not want the directory number to show
on the line appearance. Enter text that identifies this directory
number for a line/phone combination.
Suggested entries include name of the boss, department, or other
appropriate information to identify multiple directory numbers to
a secretary or assistant who monitors multiple directory numbers.
Display (Internal Caller ID)
This field provides the same information as the Display (Internal
Caller ID) field, but you must limit input to ASCII characters.
Devices that do not support Unicode (internationalized) characters
display the content of the ASCII Display (Internal Caller ID)
field.
Setting applies only to the current device unless you check the check
box at right (Update Shared Device Settings) and click the
Propagate Selected button. (The check box at right displays only
if other devices share this directory number.)
ASCII Display (Internal Caller ID)
Enter text that identifies this directory number for a line/phone
combination.
The default language specifies
English
Note
Line Text Label
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
76 OL-28580-01
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL