User guide

DescriptionField
Choose the ring setting that is used when this phone has another
active call on a different line. Choose one of the following options:
• Use system default
• Disable
• Flash only
• Ring once
• Ring
• Beep only
Ring Setting (Phone Active)
This field determines the type of notification an incoming call sends
to members of a call pickup group. If the called phone does not
answer, the phones in the call pickup group that are idle will either
hear a short ring (ring once) or hear nothing (disabled).
• Use System Default—The value of this field gets determined
by the setting of the Cisco CallManager service parameter
Call Pickup Group Audio Alert Setting of Idle Station.
• Disable—No alert is sent to members of the call pickup group.
• Ring Once—A short ring is sent to members of the call pickup
group.
Call Pickup Group Audio Alert Setting
(Phone Idle)
This field determines the type of notification an incoming call sends
to members of a call pickup group. If the called phone does not
answer, the phones in the call pickup group that are busy will either
hear a beep only or hear nothing (disabled).
• Use System Default—The value of this field gets determined
by the setting of the Cisco CallManager service parameter
Call Pickup Group Audio Alert Setting of Busy Station.
• Disable—No alert is sent to member of the call pickup group.
• Beep Only—A beep is sent to members of the call pickup
group.
Call Pickup Group Audio Alert Setting
(Phone Active)
Cisco Unified Communications Manager Bulk Administration Guide, Release 9.1(1)
OL-28580-01 71
BAT phone templates
REVIEW DRAFT - CISCO CONFIDENTIAL