USER GUIDE 10/100 Compact USB 2.
About This Guide About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons: NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning and it is something that could damage your property or product.
Table of Contents Chapter 1: Product Overview 1 Ports and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 2: Configuration 2 Driver Installation for Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Driver Installation for Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1 Product Overview Chapter 1: Product Overview A Compact USB 2.0 10/100 Network Adapter allows you to connect to any 10/100Mbps or Gigabit hub or switch without having to open your PC. The Gigabit USB Network Adapter from Linksys allows you to instantly connect to a network from a USB-enabled desktop or notebook PC running Windows Millennium, 2000, or XP. The Plug-andPlay compatible device attaches to your PC’s USB port via a USB Type A connector.
Configuration Chapter 2 Chapter 2: Configuration 3. Select Search for the best driver in these locations. Only select Include this location in the search:, and enter D:\winxp in the field provided. Then click the Next button. This chapter will take you through all the steps necessary to install the driver for the Compact USB 2.0 10/100 Network Adapter. After physically connecting the Adapter to your computer’s USB port or hub, follow these instructions to install the hardware device driver.
Configuration Chapter 2 5. The Completing the Found New Hardware Wizard screen will appear. Click the Finish button. Then remove the Driver CD from the CD-ROM drive. 4. Select Specify a location to find the correct driver. Click the Next button to continue. Locate Driver Files Installation Complete Congratulations! The installation of the Compact USB 2.0 10/100 Network Adapter is complete.
Configuration Chapter 2 8. The Completing the Found New Hardware Wizard screen will appear. Click the Finish button, and remove the Driver CD from the CD-ROM drive. Congratulations! The installation of the Compact USB 2.0 10/100 Network Adapter is complete. NOTE: Throughout this user guide, it is assumed that “D” is the letter of your CD-ROM drive. 4. When Windows notifies you that it is ready to install the driver files, click the Next button to continue. Driver Installation for Windows Millenium 1.
Configuration Chapter 2 Windows Millennium Network Configuration Click the OK button. File and printer sharing for Microsoft Networks should now appear in the list of installed components. NOTE: Linksys does not provide technical support or troubleshooting for network configuration. NOTE: If you do not enable file and printer sharing, your PC will be invisible on the network and inaccessible to other users. 1. From the Windows Millennium desktop, right-click the My Network Places icon.
Configuration Chapter 2 Driver Installation for Windows 98 1. If you haven’t already, start your computer. NOTE: Linksys does not provide technical support or troubleshooting for network configuration. 2. Windows 98 will automatically detect the Adapter connected to your PC. When the first Add New Hardware Wizard screen appears, insert the Driver CD into your CD-ROM drive, and click the Next button. 3. Select Search for the best driver for your device (Recommended), and click the Next button.
Configuration Chapter 2 5. When Windows notifies you that it is ready to install the driver files, click the Next button to continue. Windows 98 Network Configuration If you are installing the Adapter in a Windows 98 PC that is used in an NT domain, go to “Appendix B: Client for Microsoft Setup for Windows 98.” NOTE: Linksys does not provide technical support or troubleshooting for network configuration. 1. From the Windows 98 desktop, right-click the Network Neighborhood icon. Then click Properties. 2.
Configuration Chapter 2 If you’d like to share your printer with other users on the network, select I want to be able to allow others to print to my printer(s). Click the OK button. File and printer sharing for Microsoft Networks should now appear in the list of installed components. 6. Click the Identification tab. Enter the name of your computer in the Computer name field. Choose a name that is different from the other computer names on the network. 5.
Configuration Chapter 2 9. From the Access Control tab, you can set the level of access that network users will have to this computer. Access Control Tab 10. Click the OK button. Your system may ask you for your Windows 98 CD-ROM or the location of the Windows 98 installation files. If it does, direct Windows to the appropriate location (e.g., C:\windows\options\cabs or D:\win98 if you have the Windows 98 CD-ROM and “D” represents your CD-ROM drive). 11.
Troubleshooting Appendix A Appendix A: Troubleshooting This appendix provides solutions to problems that may occur during the installation and operation of this product. Read the description below to solve your problems. If you can’t find an answer here, check the Linksys website at www.linksys.com/international. Common Problems and Solutions Windows doesn’t detect new hardware with the Gigabit USB Network Adapter hardware connected, or it continues to detect the adapter each time I restart the PC.
Troubleshooting Appendix A •• Verify that you have logged in correctly. Refresh the screen by pressing F5 several times. On some notebook PCs, the Compact USB 2.0 10/100 Network Adapter fails to configure correctly after the drivers have been loaded. After loading the software drivers, it may be necessary to do the following: 1. Log off and unplug the device from your PC’s USB port. 2. Turn off your PC. 3. Plug the device back in and reboot. 4. Log on after the PC reboots.
Specifications Appendix B Appendix B: Specifications Model USB200M Standards USB 1.1, and 2.0; IEEE 802.3, IEEE 802.u Ports One USB Type A, Male Connector One RJ-45 Port Speeds (Mbps) USB 1.5 (Low Speed), 12 (Full Speed), up to 480 (High Speed) Ethernet 10 or 100 (Half Duplex) 20 or 200 (Full Duplex) Cabling Category 5 Ethernet Network, USB LEDs 10/100, F/H, LINK/ACT Environmental Dimensions 23 x 10 x 69 mm Unit Weight 0.068 kg Certifications FCC Class B, CE, ICES Operating Temp.
Appendix C Appendix C: Warranty Information Limited Warranty Linksys warrants that this Linksys hardware product will be substantially free of defects in materials and workmanship arising under normal use during the Warranty Period, which begins on the date of purchase by the original enduser purchaser and lasts for the period specified below: •• Two (2) years for new product •• Ninety (90) days for refurbished product This limited warranty is non-transferable and extends only to the original end-user pur
Appendix C Warranty Information and a copy of your dated proof of original purchase when returning your product. Products received without a RMA number and dated proof of original purchase will be rejected. Do not include any other items with the product you are returning to Linksys. Defective product covered by this limited warranty will be repaired or replaced and returned to you without charge.
Regulatory Information Appendix D Appendix D: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix D User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products.
Appendix D Regulatory Information Eesti (Estonian) - Keskkonnaalane informatsioon Euroopa Liidus asuvatele klientidele Français (French) - Informations environnementales pour les clients de l’Union européenne Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on seadmeid, millel on tootel või pakendil käesolev sümbol , keelatud kõrvaldada koos sorteerimata olmejäätmetega. See sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest olmejäätmevoogudest.
Appendix D Regulatory Information Lietuvškai (Lithuanian) - Aplinkosaugos informacija, skirta Europos Sąjungos vartotojams Nederlands (Dutch) - Milieu-informatie voor klanten in de Europese Unie Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį), negalima šalinti kartu su nerūšiuotomis komunalinėmis atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai nuo bendro buitinių atliekų srauto.
Appendix D Regulatory Information Português (Portuguese) - Informação ambiental para clientes da União Europeia Slovenščina (Slovene) - Okoljske informacije za stranke v Evropski uniji A Directiva Europeia 2002/96/CE exige que o equipamento que exibe este símbolo no produto e/ou na sua embalagem não seja eliminado junto com os resíduos municipais não separados. O símbolo indica que este produto deve ser eliminado separadamente dos resíduos domésticos regulares.
Appendix E Appendix E: Software License Agreement Software in Linksys Products This product from Cisco-Linksys LLC or from one of its affiliates Cisco Systems-Linksys (Asia) Pte Ltd. or CiscoLinksys K.K. (“Linksys”) contains software (including firmware) originating from Linksys and its suppliers and may also contain software from the open source community. Any software originating from Linksys and its suppliers is licensed under the Linksys Software License Agreement contained at Schedule 1 below.
Software License Agreement Appendix E your Linksys product and/or the Software is being used in accordance with the terms of this Agreement; (iii) to provide improvements to the way Linksys delivers technology to you and to other Linksys customers; (iv) to enable Linksys to comply with the terms of any agreements it has with any third parties regarding your Linksys product and/or Software and/or (v) to enable Linksys to comply with all applicable laws and/or regulations, or the requirements of any regulat
Appendix E GNU General Public License is intended to guarantee your freedom to share and change free software–to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.
Appendix E c. If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.
Software License Agreement Appendix E 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
Appendix E GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Appendix E freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
Appendix E Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
Appendix E Software License Agreement b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. 8.
Software License Agreement Appendix E software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12.
Appendix E Software License Agreement OpenSSL License Original SSLeay License Copyright © 1998-2007 The OpenSSL Project. All rights reserved. Copyright © 1995-1998 Eric Young (eay@cryptsoft.com)All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). 1.
Appendix E Software License Agreement DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
