User guide

Chapter 2
Configuration
3
Gigabit USB Adapter
To install the driver in a different folder, click Browse
and select a folder location. Then, click Next.
Select Folder
The driver files will be copied onto your PC.3.
Setup Being Performed
This screen will appear when the installation is 4.
complete. Click Finish to finish the installation.
Installation Complete
Click the Exit tab to exit the Utility.
Hardware Installation
Connect the USB Connector of the Gigabit USB Adapter 1.
to the USB port of your computer. Slide the connector
out from it’s holder, unwind the cable, and connect the
USB Connector to the USB port in your PC.
The Adapter will be automatically detected and
installed by Windows. Your Windows operating system
may require you to restart your computer to complete
the installation.
Connect an Ethernet cable to the Ethernet port on the 2.
Adapter, then connect the other end to the Ethernet
port on the switch or other networking device.
The setup is complete.