Installation guide

9
Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
78-6030-03
Field-Replaceable Units
Field-Replaceable Units
All major components of the broadband fixed wireless system, as well as the major components of the
Cisco uBR7200 series routers, are field-replaceable units (FRUs). Each FRU is shipped with instructions
for removal and reinstallation.
The following components are available as FRUs:
• Wireless modem card
• Power feed panel
• Cisco uBR7200 series router components:
– Network processing engine
– Input/output controller
– Port adapters
– Power supplies
– Fan tray
– Chassis
– Subchassis and midplane
– Flash memory cards
– Rack mount and cable-management kit
For ordering information, contact a Cisco customer service representative. See the “Cisco.com” section
on page 125 for more information.
Installation Prerequisites
This section provides a list of parts and tools that you need to remove and replace a wireless modem card
in the Cisco uBR7200 series router and the parts and tools to install the power feed panel in an equipment
rack or on the wall. This section also includes safety and ESD-prevention guidelines to help you avoid
injury to yourself and damage to the equipment.
Parts and Tools
The following sections describe the parts and tools required to install each of the components. If you
need more detailed information regarding cables or connectors, refer to the Cisco Broadband Fixed
Wireless Site Planning Guide.