Installation guide

88
Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
78-6030-03
Command Reference
If a particular chip is identified, the details of the image to be loaded on that chip are displayed. If no
chip name is specified, the current radio configuration is retrieved for every chip on the modem card. All
the images in the repository are compared. The image that provides the closest match in capability is
selected, and the details of that image are displayed.
show interfaces radio slot/port imagehdr [chip chipname [current | operational]]
Syntax Description
Example
The following example will display the image details of the chip named dsp1a currently loaded on the
chip on the modem card in slot 3, port 0:
UBR04# show interfaces radio 3/0 imagehdr dsp1a current
show radio repository
Use this command in privileged EXEC mode to display the protocol-specific list of images in the
repository. The repository is a list of current configuration images. When the modem card is initiated (no
shut), this list is searched and the correct image downloaded. Privileged configuration access is required.
show radio repository [header] [protocol]
Syntax Description
Example
The following example lists images related to memory:
UBR04# show radio repository mem
mem:/MyMemImages/dsp1Dual.img
mem:/MyMemImages/dsp2Dual.img
mem:/MyMemImages/dsp1Single.img
slot Positive integer representing the Cisco uBR7200 series slot number.
port Positive integer representing the port number on that slot.
chipName A character string identifying a chip.
current Display the image header (details) for the image currently loaded on the chip.
operational Display the image header for the image that will be loaded on the chip for the current
configuration.
header Image header details associated with the list of images will also be displayed.
protocol {mem | tftp | flash}