Installation guide

8
Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
78-6030-03
Wireless Modem Card and Subsystem Overview
Diversity MC (modem
card)
SMA
(female)
Input and Output Provides 24-MHz reference,
receive and transmit IF signals
from/to the wireless modem card
(if the diversity option is used).
Main ODU Output N-Type
(female)
Input and Output Provides –48V power to the
main transverter, 24-MHz
reference receive and transmit IF
signal from/to the wireless
modem card.
Main MC (modem
card)
SMA
(female)
Input and Output Provides 24-MHz reference,
receive and transmit IF signals
from/to the wireless modem
card.
Main ODU Control DB-9
(female)
Input and Output
Bidirectional data
communication between
the wireless modem card
and the main transverter.
Physical connection to the main
transverter for RF subsystem
control interface.
Main MC (modem
card) Control
8-pin RJ-45
(female)
Input and Output
Bidirectional data
communication between
the wireless modem card
and the main transverter.
Physical connection for RF
subsystem control interface from
the wireless modem card.
Diversity ODU Control DB-9
(female)
Input and Output
Bidirectional data
communication between
the wireless modem card
and the diversity
transverter.
Physical connection to the
diversity transverter for RF
subsystem control interface (if
the diversity option is used).
Diversity MC (modem
card) Control
8-pin RJ-45
(female)
Input and Output
Bidirectional data
communications between
the wireless modem card
and the diversity
transverter.
Physical connection for RF
subsystem control interface from
the wireless modem card (if the
diversity option is used).
Table 4 Power Feed Panel Connectors (continued)
Connector Type Input/Output Function