Installation guide

7
Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
78-6030-03
Wireless Modem Card and Subsystem Overview
Figure 5 shows the front panel of the power feed panel, and Table 3 describes the functions of the LEDs.
Figure 6 shows the rear panel, and Table 4 describes the functions of the connectors.
Figure 5 Power Feed Panel (Front Panel)
Figure 6 Power Feed Panel (Rear Panel)
Table 3 Power Feed Panel LEDs
LED Function
Main Power On
(visible on front and rear
panel)
When lit, indicates that power is going to the main transverter.
Diversity Power On
(visible on front and rear
panel)
When lit, indicates that power is going to the diversity transverter.
27015
MAIN
POWER ON
DIVERSITY
POWER ON
CISCO uBR – WPFD
POWER FEED PANEL
Table 4 Power Feed Panel Connectors
Connector Type Input/Output Function
DC Power Input Pluggable
terminal
block
Input Power source connection for the
main and diversity transverters.
Diversity ODU Output N-Type
(female)
Input and Output Provides –48V power to the
diversity transverter, 24-MHz
reference, receive and transmit
IF signal from/to the wireless
modem card (if the diversity
option is used).
OUTPUT
-48V ,7A
OUTPUT
-48V ,7A
24271
MAIN
DIVERSITY
CAUTION: This equipment has a connection between the earthed conductor of the
d.c. supply circuit and the earthing conductor. See installation instructions.
INPUT
PWR
ON
PWR
ON
DIVERSITY
ODU
ODU
MC
MC
MAIN
MAIN
CONTROL
DIVERSITY
ODU
ODU
MC
MC
-48V 15A, 720VA
CAUTION
USE COPPER
CONDUCTORS ONLY
MAIN
DIVERSITY
CAUTION: This equipment has a connection between the earthed conductor of the
d.c. supply circuit and the earthing conductor. See installation instructions.
PWR
ON
PWR
ON
DIVERSITY
ODU
ODU
MC
MC
MAIN
MAIN
CONTROL
DIVERSITY
ODU
ODU
MC
MC
CAUTION
USE COPPER
CONDUCTORS ONLY
INPUT
-48V 15A, 720VA
OUTPUT
-48V ,7A
OUTPUT
-48V ,7A
-
+
OFF
ON
OFF
ON
OFF
ON
OFF
ON