Installation guide
Table Of Contents
- CiscouBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation an...
- If You Need More Information
- Wireless Modem Card and Subsystem Overview
- Field-Replaceable Units
- Installation Prerequisites
- Removing and Installing the Wireless Modem Card
- Installing the Power Feed Panel
- Configuring a Wireless Modem Card
- Command Reference
- Syntax Conventions
- Startup Commands
- Installation and Configuration Commands
- Operating Commands
- Monitoring the System
- Troubleshooting
- show controllers radio
- radio histogram
- radio byteErrorHist
- show interfaces radio (histspec)
- show interfaces radio (histdata)
- debug radio
- Images and Image Repositories
- radio image-add
- radio image-move
- show interfaces radio (imagehdr)
- show radio repository
- radio snapshot
- radio scope-output
- radio timeline
- show interfaces radio (tlspec)
- show interfaces radio (tldata)
- Regulatory Compliance and Safety Information
- FCC Registration and Requirements
- Translated Safety Warnings
- Short-Circuit Protection Warning
- Disconnect Device Warning
- Lightning Activity Warning
- Installation Warning
- Jewelry Removal Warning
- Supply Circuit Warning
- Service Personnel Warning
- Product Disposal Warning
- Faceplates and Cover Panel Requirement
- Chassis—Rack-Mounting and Servicing Warning
- Restricted Area Warning
- Earthed Conductor Warning
- Power Cabling Warning
- Ground Connection Warning
- Power Supply Wiring Warning
- Copper Conductors Warning
- Exposed DC Power Wire Warning
- 48 VDC Power System Warning
- SELV-IEC 60950 DC Power Supply Warning
- DC Power Disconnection Warning
- DC Input Wiring Warning
- Ground Wire Connection Warning
- Ground Conductor Warning
- No. 26 AWG Wire Warning
- Coaxial Cable Specification Warning
- Transverter Location Warning
- Obtaining Documentation
- Obtaining Technical Assistance

69
Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
78-6030-03
Command Reference
Example
The following command will display the 24-hour link metrics for the wireless modem card in slot 6, port
0 of the Cisco uBR7200 series router:
UBR04(config-if)# show interfaces radio 6/0 24hour-metrics
Day statistics (cumulative). Captured at 12:33:01 UTC Tue May 25 1999
=====|=========|==========|==========|==========|==========|==========|
Days| Time | EFS | ES | SES | CSES | DM |
Ago | | | | | | |
=====|=========|==========|==========|==========|==========|==========|
0 16:00:23 57599 1 1 0 0
When 1hour-metrics are requested, a table of values for the last 24 hours are displayed. Values are
cumulative—every successive row is the sum of the corresponding values in the previous row plus the
values determined for the 1-hour period represented by that row.
Note If the delta option is specified, the values displayed represent the differences between the previous
row and the current row.
The following values are displayed:
Hour Ago Represents how long ago (in hours) this entry was captured.
Time Represents the time this entry was updated.
EFS Represents Codeword Error Free Seconds detected in the last 1 operational
hour. A Codeword EFS is 1 second when the radio was synchronized and no
ARQ codeword errors were detected on the link.
ES Represents the Codeword Errored Seconds detected in the last 1 operational
hour. A Codeword ES is 1 second when the radio link was synchronized and 1
or more ARQ codeword errors were detected on the link.
SES Represents the Codeword Severely Errored Seconds detected in the last 1
operational hour. A Codeword SES is 1 second when the radio link was
synchronized and the number of ARQ codeword errors detected was greater
than a configured threshold.
CSES Represents the Codeword Consecutively Severely Errored Seconds detected in
the last 1 operational hour. This measures the number of times a sequence of
Codeword SES crosses a configured threshold value. The counter is
incremented by 1 for each occurrence.
DM Represents the Codeword Degraded Minutes detected in the last 1 operational
hour. It is equal to 60 Codeword Degraded Seconds.
Pre ARQ
Errored Codewords
Represents the pre-ARQ errored codewords detected in the last 1 hour. This is
the number of Reed-Solomon codeword errors indicated by the codec to the
ARQ.