Installation guide
Table Of Contents
- CiscouBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation an...
- If You Need More Information
- Wireless Modem Card and Subsystem Overview
- Field-Replaceable Units
- Installation Prerequisites
- Removing and Installing the Wireless Modem Card
- Installing the Power Feed Panel
- Configuring a Wireless Modem Card
- Command Reference
- Syntax Conventions
- Startup Commands
- Installation and Configuration Commands
- Operating Commands
- Monitoring the System
- Troubleshooting
- show controllers radio
- radio histogram
- radio byteErrorHist
- show interfaces radio (histspec)
- show interfaces radio (histdata)
- debug radio
- Images and Image Repositories
- radio image-add
- radio image-move
- show interfaces radio (imagehdr)
- show radio repository
- radio snapshot
- radio scope-output
- radio timeline
- show interfaces radio (tlspec)
- show interfaces radio (tldata)
- Regulatory Compliance and Safety Information
- FCC Registration and Requirements
- Translated Safety Warnings
- Short-Circuit Protection Warning
- Disconnect Device Warning
- Lightning Activity Warning
- Installation Warning
- Jewelry Removal Warning
- Supply Circuit Warning
- Service Personnel Warning
- Product Disposal Warning
- Faceplates and Cover Panel Requirement
- Chassis—Rack-Mounting and Servicing Warning
- Restricted Area Warning
- Earthed Conductor Warning
- Power Cabling Warning
- Ground Connection Warning
- Power Supply Wiring Warning
- Copper Conductors Warning
- Exposed DC Power Wire Warning
- 48 VDC Power System Warning
- SELV-IEC 60950 DC Power Supply Warning
- DC Power Disconnection Warning
- DC Input Wiring Warning
- Ground Wire Connection Warning
- Ground Conductor Warning
- No. 26 AWG Wire Warning
- Coaxial Cable Specification Warning
- Transverter Location Warning
- Obtaining Documentation
- Obtaining Technical Assistance
68
Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
78-6030-03
Command Reference
Time since last synchronization failure: 00:25:14
Error characteristics of the physical link:
Percent error free seconds: 99.2
Percent error free seconds: 0.7
Percent severely errored seconds: 0.7
Percent degraded minutes: 0.0
Synchronization event counters:
Synchronization success count: 1
Synchronization failure count: 0
Synchronization loss count: 0
Managed Synchronization loss count : 0
Physical link data rates:
Effective rate: 44230307
Percent efficiency: 100.0
When 24hour-metrics are requested, a table of values for the preceding 32 days is displayed. Values are
cumulative—every successive row is the sum of the corresponding values in the previous row plus the
values determined for the 24-hour period represented by that row. The following values are displayed:
Days Ago Represents how long ago (in days) the data was captured.
Time Represents the time at which the entry was updated.
EFS Represents Codeword Error Free Seconds detected in the last 24 operational hours. A
Codeword EFS is 1 second when the radio was synchronized and no ARQ codeword
errors were detected on the link.
ES Represents the Codeword Errored Seconds detected in the last 24 operational hours. A
Codeword ES is 1 second when the radio link was synchronized and 1 or more ARQ
codeword errors were detected on the link.
SES Represents the Codeword Severely Errored Seconds detected in the last 24 operational
hours. A Codeword SES is 1 second when the radio link was synchronized and the
number of ARQ codeword errors detected was greater than a configured threshold.
CSES Represents the Codeword Consecutively Severely Errored Seconds detected in the last
24 operational hours. This measures the number of times a sequence of Codeword SES
crosses a configured threshold value. The counter is incremented by 1 for each
occurrence.
DM Represents the Codeword Degraded Minutes detected in the last 24 operational hours. It
is equal to 60 Codeword Degraded Seconds.