Installation guide

65
Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
78-6030-03
Command Reference
(details for the last 24 hours)
show interface radio slot/port radio 1minute-metrics 1min_options
(details for the last 60 minutes)
show interface radio slot/port radio 1second-metrics 1sec_options
(details for the last 60 seconds)
show interface radio slot/port radio 1tick-metrics 1tick_options
(details for the last n hardware ticks)
Four categories of metrics are maintained by the radio link’s software and hardware:
Category 1—Cumulative metrics where only one set is maintained for the entire collection period.
LinkMetrics fall under this category.
Category 2—Cumulative metrics where a table of values is maintained, providing metrics relating to the
time period when the two ends of the link are synchronized. 24hour-metrics, 1hour-metrics, and
1minute-metrics fall into this category.
Category 3—Cumulative metrics where a table of values is maintained, providing metrics maintained by
the hardware to derive the information in categories 2 and 3. 1second-metrics fall into this category.
Category 4—Noncumulative. A table of instantaneous values are maintained. They provide metrics that
the hardware maintains to derive the information in category 3. 1tick-metrics fall into this category.
Syntax Description
slot Positive integer representing the Cisco uBR7200 series slot number.
port Positive integer representing the port number on that slot.
1Hr_options [{all | G.821}] [latest_entries] [delta]
All Show all details.
G.821 Show G.821 (ES) metrics
latest-entries Number of latest entries to show (1 to 60, depending on the command).
delta Values displayed are differences between successive measurements.
1sec_options [{all | Error-metrics | RR-metrics}] [latest-entries] [delta]
Error-metrics Show listing of pre-ARQ and post-ARQ codeword errors.
RR-metrics Show statistics of repeat requests.
1tick_options [{all | Error-metrics | RR-metrics}] [latest-entries]