Installation guide
Table Of Contents
- CiscouBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation an...
- If You Need More Information
- Wireless Modem Card and Subsystem Overview
- Field-Replaceable Units
- Installation Prerequisites
- Removing and Installing the Wireless Modem Card
- Installing the Power Feed Panel
- Configuring a Wireless Modem Card
- Command Reference
- Syntax Conventions
- Startup Commands
- Installation and Configuration Commands
- Operating Commands
- Monitoring the System
- Troubleshooting
- show controllers radio
- radio histogram
- radio byteErrorHist
- show interfaces radio (histspec)
- show interfaces radio (histdata)
- debug radio
- Images and Image Repositories
- radio image-add
- radio image-move
- show interfaces radio (imagehdr)
- show radio repository
- radio snapshot
- radio scope-output
- radio timeline
- show interfaces radio (tlspec)
- show interfaces radio (tldata)
- Regulatory Compliance and Safety Information
- FCC Registration and Requirements
- Translated Safety Warnings
- Short-Circuit Protection Warning
- Disconnect Device Warning
- Lightning Activity Warning
- Installation Warning
- Jewelry Removal Warning
- Supply Circuit Warning
- Service Personnel Warning
- Product Disposal Warning
- Faceplates and Cover Panel Requirement
- Chassis—Rack-Mounting and Servicing Warning
- Restricted Area Warning
- Earthed Conductor Warning
- Power Cabling Warning
- Ground Connection Warning
- Power Supply Wiring Warning
- Copper Conductors Warning
- Exposed DC Power Wire Warning
- 48 VDC Power System Warning
- SELV-IEC 60950 DC Power Supply Warning
- DC Power Disconnection Warning
- DC Input Wiring Warning
- Ground Wire Connection Warning
- Ground Conductor Warning
- No. 26 AWG Wire Warning
- Coaxial Cable Specification Warning
- Transverter Location Warning
- Obtaining Documentation
- Obtaining Technical Assistance

38
Cisco uBR7200 Series Universal Broadband Router Wireless Modem Card and Subsystem Installation and Configuration
78-6030-03
Command Reference
Syntax Conventions
The commands used in this section follow the conventions in Table 7.
Table 7 Syntax Conventions
Convention Meaning Comments
Boldface Commands and keywords you
enter literally as shown
transmit-power
Italics Variables for which you supply
values
command type interface
You replace the variable with the
type of interface.
Square brackets ([ ]) Optional elements command [abc]
abc is optional (not required), but
you can choose it.
Vertical bars ( | ) Separated alternative elements command [abc | def]
You can choose either abc or def, or
neither, but not both.
Braces ({ }) Required choices command {abc | def}
You must use either abc or def, but
not both.
Braces and vertical bars within
square brackets ([{ | }])
A required choice within an
optional element
command [abc {def | ghi}]
You have three options:
• Nothing
• abc def
• abc ghi
System prompts Denotes interactive sessions,
indicates that the user enters
commands at the prompt
The system prompt indicates the
current command mode. For
example, the prompt
Router (config)# indicates global
configuration mode.
Screen font Terminal sessions and
information the system
displays
Angle brackets (<>) Nonprinting characters such as
passwords
Exclamation points (!) at the
beginning of a line
A comment line Comments are sometimes
displayed by the Cisco IOS
software.