User guide

Changing Playback Speed for an Individual Message by Using the Phone
Keypad
Procedure
The key that you press to adjust playback speed will depend on your conversation. Ask your system
administrator which keys are assigned to increase and decrease playback speed. While listening to a message,
use the following speed settings:
DescriptionOption
Slow message playback.
Press decrease key
Fast message playback.
Press increase key once
Faster message playback.
Press increase key again
Changing Playback Speed for an Individual Message by Using Voice Commands
Procedure
While listening to a message, use the following voice commands:
CommandAction
"Slower"Slow playback
"Faster"Fast playback
"Reset speed"Reset playback speed
There are four playback speeds available: the speed at which the message was recorded, one slower
speed, and two faster speeds.
Tip
Changing Playback Volume for the Connection Conversation
You can use voice commands to change the volume of the Cisco Unity Connection conversation at any point
while Connection is playing prompts. (You cannot use the phone keypad to adjust the conversation volume.)
Changes last until you hang up the phone; the next time you call Connection, the volume is reset to the default
setting.
User Guide for the Cisco Unity Connection Phone Interface (Release 8.x)
OL-21232-01 79
Changing Playback Speed for an Individual Message by Using the Phone Keypad
Changing Playback Volume for the Connection Conversation