User guide

Enabling a Rule Set by Using the Phone Keypad
Procedure
Step 1
Call and sign in to Connection.
Step 2
At the Main menu, select the option Setup Options, then Transfer Settings, and Personal Call Transfer
Rules.
Connection plays the prompt to enable a rule set only when personal call transfer rule sets are enabled
for use.
Note
Step 3
Select the option Enable a Transfer Rule Set.
Step 4
Follow the prompts to activate a rule set and to set the number of days you want the rule set to be active.
Enabling a Rule Set by Using Voice Commands
Procedure
Step 1
Call and sign in to Connection.
Step 2
When Connection asks, "What do you want to do," say:
"Setup Options." (Connection temporarily switches to the phone keypad.)
Step 3
On the phone keypad, select the option Transfer Settings, then Personal Call Transfer Rules.
Connection plays the prompt to enable a rule set only when personal call transfer rule sets are enabled
for use.
Note
Step 4
Select the option Enable a Transfer Rule Set.
Step 5
Follow the prompts to activate a rule set and to set the number of days you want the rule set to be active.
To switch back to using voice commands, keep pressing * until you hear the "Voice Command
Conversation" prompt.
Tip
Disabling a Rule Set by Using the Phone Keypad
Procedure
Step 1
Call and sign in to Connection.
Step 2
At the Main menu, select the option Setup Options, then Transfer Settings, then Personal Call Transfer
Rules, and Disable a Transfer Rule Set.
Connection plays the prompt to disable a rule set only when there is a rule set that is enabled but not
active.
Note
Step 3
Follow the prompts to disable the rule set.
User Guide for the Cisco Unity Connection Phone Interface (Release 8.x)
72 OL-21232-01
Enabling a Rule Set by Using the Phone Keypad
Enabling and Disabling Individual Rule Sets