User guide

Finding Messages with Go to Message by Using the Phone Keypad
Procedure
Step 1
Call and sign in to Connection.
Step 2
If you are not using voice commands, skip to Step 3.
If you are using voice commands, say "Touchtone conversation" or press 9 to temporarily change to using
the phone keypad.
To switch back to using voice commands after you have finished using Go to Message, hang up and
sign in to Connection again.
Tip
Step 3
At the Main menu, select the applicable option, Play New Messages or Review Old Messages.
Step 4
Press the Go to Message shortcut keys.
Ask your Connection administrator for the shortcut keys that you use to hear the prompt for entering
the message number.
Tip
Step 5
When prompted, enter the message number followed by #.
Step 6
Follow the prompts to manage the message after you have listened to it.
User Guide for the Cisco Unity Connection Phone Interface (Release 8.x)
22 OL-21232-01
Finding Messages with Go to Message by Using the Phone Keypad
Finding Messages by Using the Go to Message Option