Specifications

4-5
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 4 Configuration Tasks
Configuration Tasks
16. Adding and Modifying a User, page 1 • Username—User ID. The username must be at least 3 and no more
than 32 characters. Users IDs must start with a letter. Do not use
spaces in the username.
• (Optional) Full name—First and last name of the subscriber.
• (Optional) Group—Name of a group in which this subscriber is a
member.
• Extension—Phone extension for the subscriber.
If you create a subscriber or group with the CLI, you may choose to
provide a password and PIN.
• Password—Password for this subscriber for accessing the
Cisco
Unity Express GUI.
• PIN—Personal identification number for this subscriber for
accessing the Cisco Unity Express telephone user interface (TUI).
17. Adding and Modifying a Group, page 7 EXEC mode:
• Name of the group.
• (Optional) Description of the group.
• (Optional) Full name of the group.
Configuration mode:
• Name of the group.
• (Optional) One or more member user IDs.
• (Optional) User ID of the owner.
• (Optional) Extension or telephone number of the group.
• (Optional) Full E.164 telephone number of the group.
The group does not need a mailbox associated with it.
Note If a subscriber must access a general delivery mailbox (GDM),
the subscriber must have a personal mailbox assigned first.
18. Planning Mailbox Configuration, page 4 • Mailbox owner.
• (Optional) Mailbox size—Total number of seconds from all
messages stored in a subscriber’s voice mailbox.
• (Optional) Message storage time—Number of days that the system
saves old messages.
• (Optional) Message length—Maximum number of seconds for any
message stored in a voice mailbox.
• (Optional) Telephone numbers for the voice-mail system,
auto-attendant, and operator extension.
Table 4-1 Configuration Tasks (continued)
Task and Procedure Location Additional Information Needed