Specifications

4-4
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 4 Configuration Tasks
Configuration Tasks
14. Configuring JTAPI Triggers for the
Applications (Cisco Unified
Communications Manager Only), page 43
• Telephone number that invokes the application. The number cannot
be the same for both voice mail and autoattendant.
• Number of seconds the system must wait for a caller response
before it times out and drops the call.
• Language to use for the prompts. Cisco Unity Express supports
multiple languages. Only one can be installed on the system. See the
Release Notes for Cisco Unity Express for a list of available
languages.
• Maximum number of callers that can access the trigger
simultaneously. See
“Sharing Ports Among Applications and
Triggers” on page 46 for guidelines on assigning this value.
15. (Optional) Configuring System-Wide
Voice-Mail Parameters, page 20
• Capacity—Total amount of storage time in hours allowed for all
mailboxes in the system. The factory default is the maximum
allowed storage for your system.
• Expiration date—Number of days a message is saved in the mailbox
before the voice-mail system deletes it. The factory default value is
30 days.
• Language—Language used for voice mail prompts. Cisco Unity
Express supports several languages. Only one can be installed on
the system. See the
Release Notes for Cisco Unity Express for a list
of available languages.
• Mailbox size—Maximum number of seconds of storage for voice
messages in a mailbox. The factory default value is determined by
dividing the maximum storage capacity by the maximum number of
mailboxes (personal plus general delivery).
• Message length—Maximum number of seconds for any one stored
message in a mailbox. The factory default is 60 seconds.
• Recording time—Maximum amount of time for a subscriber’s
recorded mailbox greeting.
• Operator extension—Extension of the voice-mail operator.
• Destination mailbox for forwarded calls—Choose either the
original called number or last redirected number where you want to
store the voice message of a forwarded call.
Table 4-1 Configuration Tasks (continued)
Task and Procedure Location Additional Information Needed