Specifications

3-2
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 3 Entering and Exiting the Command Environment
Entering the Command Environment
3. Enter the user ID and password of the router.
4. Choose one of the following:
• For ISM-SRE-300-K9: service-module ism slot/unit session
• For SM-SRE-700-K9, SM-SRE-710-K9, SM-SRE-900-K9, and SM-SRE-910-K9:
service-module sm slot/unit session
• For NME-CUE: service-module integrated-service-engine slot/unit session
• For NM-CUE-EC, NM-CUE, and AIM-CUE: service-module service-engine slot/unit session
• For AIM2-CUE: service-module integrated-service-module slot/unit session
5. (Optional) enable
DETAILED STEPS
Command or Action Purpose
Step 1
Open a Telnet session. Use a DOS window, a secure shell, or a software
emulation tool such as Reflection.
Step 2
telnet ip-address
Example:
C:\>telnet 172.16.231.195
Specifies the IP address of the router.
Step 3
Username:
Password:
Enter your user ID and password for the router.
Step 4
Choose one of the following:
service-module ism slot/unit session
Example:
Router# service-module ism 0/1 session
Enters the Cisco Unity Express command environment
on the ISM-SRE-300-K9.
If the message
“
Trying ip-address slot/port ...
Connection refused by remote host
appears, enter the command
service-module ism slot/port session clear
and retry this step.
service-module sm slot/0 session
Example:
Router# service-module sm 1/0
Enters the Cisco Unity Express command environment
on the SM-SRE-700-K9, SM-SRE-710-K9,
SM-SRE-900-K9, and SM-SRE-910-K9.
If the message
“
Trying ip-address slot/port ...
Connection refused by remote host
appears, enter the command
service-module sm slot/port session clear
and retry this step.