Specifications

22-7
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 22 Registering Cisco Unity Express Endpoints to Cisco Unified Messaging Gateway
Manually Registering a Cisco Unity Express Endpoint
• running Cisco Unity Express 3.0 or earlier, or
• you want to avoid autoregistration activity with an endpoint running Cisco Unity Express 3.1,
you must manually provision it from Cisco UMG. First configure the endpoint, then provision it on
Cisco UMG.
Note You need to perform these steps only if the endpoint has never undergone initial configuration - if the
endpoint is already in operation, you will already have done all this. In that case, there is nothing left to
do on the endpoint.
SUMMARY STEPS
1. config t
2. network location-id number
3. (Optional) name location-name
4. (Optional) abbreviation name
5. email domain domain-name
6. voicemail phone-prefix digit string
7. (Optional) voicemail extension-length number [min number | max number]
8. (Optional) voicemail vpim-encoding {dynamic | G711ulaw | G726}
9. (Optional) voicemail spoken-name
10. end
Repeat Steps 2 through 10 for each remote location.
11. network local location-id number
12. end
13. show network locations configured
14. show network detail location-id number
15. show network detail local
16. show network queues