Specifications

21-6
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 21 Configuring SNMP Monitoring
Setting Threshold Values for Subscriber Responses
DETAILED STEPS
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
notification security login user threshold
Example:
se-10-0-0-0(config)# notification security login
user 10
(Optional) Sets the number of invalid login
names within a 5-minute interval to
threshold. If the number of failures exceeds
this value, the system sends a notification to
the SNMP host.
The default value is 30. Valid values are 0 to
999.
Step 3
notification security login password threshold
Example:
se-10-0-0-0(config)# notification security login
password 6
(Optional) Sets the number of invalid login
passwords within a 5-minute interval to
threshold. If the number of failures exceeds
this value, the system sends a notification to
the SNMP host.
The default value is 30. Valid values are 0 to
999.
Step 4
notification security pin uid threshold
Example:
se-10-0-0-0(config)# notification pin uid 12
(Optional) Sets the number of invalid PIN
user IDs within a 5-minute interval to
threshold. If the number of failures exceeds
this value, the system sends a notification to
the SNMP host.
The default value is 30. Valid values are 0 to
999.
Step 5
notification security pin password threshold
Example:
se-10-0-0-0(config)# notification security pin
password 8
(Optional) Sets the number of invalid PIN
passwords within a 5-minute interval to
threshold. If the number of failures exceeds
this value, the system sends a notification to
the SNMP host.
The default value is 30. Valid values are 0 to
999.
Step 6
notification security pin reset threshold
Example:
se-10-0-0-0(config)# notification security pin
rest 3
(Optional) Sets the number of PIN
password resets within a 5-minute interval
to threshold. If the number of resets exceeds
this value, the system sends a notification to
the SNMP host.
The default value is 5. Valid values are 0 to
999.