Specifications

21-5
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 21 Configuring SNMP Monitoring
Setting Threshold Values for Subscriber Responses
Cisco Unity Express supports setting thresholds for the number of failures in a 5-minute interval for the
following subscriber actions:
• Logging in.
• Entering a password.
• Entering a personal identification number (PIN) user ID.
• Entering a PIN password.
• Resetting a PIN.
When the number of attempts reaches the action’s threshold, the system sends a notification to the SNMP
host.
Prerequisites
Be sure that the appropriate MIBs are installed. See the Cisco Unity Express SNMP MIB Release 2.2
guide for details.
Required Data for This Procedure
Number of times the following can occur before the system sends a notification to the SNMP host:
• Password errors (default is 30)
• Login errors (default is 30)
• PIN password errors (default is 30)
• PIN resets (default is 5)
• PIN user ID errors (default is 30)
SUMMARY STEPS
1. config t
2. (Optional) notification security login user threshold
3. (Optional) notification security login password threshold
4. (Optional) notification security pin uid threshold
5. (Optional) notification security pin password threshold
6. (Optional) notification security pin reset threshold
7. end
8. copy running-config startup-config