Specifications

CHAPTER

21-1

Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions

OL-14010-09

Configuring SNMP Monitoring

This chapter describes the procedures for configuring Simple Network Monitoring Protocol (SNMP) on

the Cisco Unity Express module to monitor the system’s health, conduct performance monitoring,

collect data, and manage traps for Cisco Unity Express voicemail and auto attendant applications.

See the Cisco Unity Express SNMP MIB Release 2.2 guide for details about the

CISCO-UNITY-EXPRESS-MIB.

The system monitoring commands are not available through the Cisco Unity Express graphical user

interface (GUI).

This chapter contains the following sections:

• Prerequisites for Implementing SNMP Monitoring on Cisco Unity Express, page 1

• Enabling the SNMP Agent, Passwords, and Trap Server, page 1

• Setting Threshold Values for Subscriber Responses, page 4

• Enabling Cisco Unity Express Shutdown Requests, page 7

Prerequisites for Implementing SNMP Monitoring on

Cisco

Unity Express

See the Cisco Unity Express SNMP MIB Release 2.2 guide for details about installing the

CISCO-UNITY-EXPRESS-MIB on the Cisco Unity Express module.

Enabling the SNMP Agent, Passwords, and Trap Server

Activating the SNMP system monitoring on Cisco Unity Express requires the following tasks:

• Enabling the SNMP agent.

• Specifying the SNMP notification passwords.

• Specifying at least one host server that will receive the notifications.

Prerequisites

Be sure that the appropriate MIBs are installed. See the Cisco Unity Express SNMP MIB Release 2.2

guide for details.