Specifications

20-9
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 20 Monitoring the System
Monitoring Queues
Additionally, a new TUI or VoiceView Express session preempts and terminates an existing VoiceView
Express session.
Monitoring Queues
Several CLI commands are available for monitoring Cisco Unity Express queues:
• Monitoring Network Queues, page 9
• Monitoring Notification Queues, page 9
• Monitoring Fax Queues, page 10
Monitoring Network Queues
To display status information about network queues, use the show network queues command in
Cisco Unity Express EXEC mode.
The following example shows output from the command:
se-10-0-0-0# show network queues
Running Job Queue
=================
ID TYPE TIME RETRY SENDER RECIPIENT
107 VPIM 06:13:26 20 jennifer [e-mail]
106 VPIM 06:28:25 20 jennifer [e-mail]
Urgent Job Queue
=================
ID TYPE TIME RETRY SENDER RECIPIENT
123 VPIM 16:33:39 1 andy [e-mail]
Normal Job Queue
=================
ID TYPE TIME RETRY SENDER RECIPIENT
122 VPIM 16:33:23 1 andy [e-mail]
124 VPIM 16:34:28 1 andy [e-mail]
125 VPIM 16:34:57 1 andy [e-mail]
Monitoring Notification Queues
To display status information about message notification queues, use the following command in
Cisco Unity Express EXEC mode:
show voicemail notification queue {email | phone}
where email displays details about the e-mail queue, and phone displays details about the phone
notification queue.
The following example shows output from two version of the show voicemail notification queue
command:
se-10-0-0-0# show voicemail notification queue email