Specifications

20-5
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 20 Monitoring the System
Monitoring Active Calls
**** Details for route ID :1200 ****
-------------------------------------
** Active Port #1:Call and Media info **
------------------------------------------
Port ID :8
Port Impl ID :16912
Port State :IN_USE
Call Id :246
Call Impl Id :E682B0A9-673311D6-8C64F237-80EC4A17@10.4.39.35
Call State :CALL_ANSWERED
Call active time(in seconds) :0
Application Associated :voicemail
Application Task Id :17000000127
Called Number :1200
Dialed Number :
Calling Number :1005
ANI :
DNIS :
CLID :sip:1005@10.4.39.35
Arrival Type :DIRECT
Last Redirected Number :
Original Called Number :
Original Dialed Number :
Media Id :1
Media State :IN_USE
Media Destination Address :10.4.39.35
Media Destination Port :18812
Destination Size :20
Destination Payload :G711ULAW64K
Media Source Address :10.4.39.135
Media Source Port :16912
Source Size :30
Source Payload :G711ULAW64K
Displaying Incoming Fax Calls
To display a list of incoming fax calls when incoming calls are recorded, use the
show ccn call fax incoming command in Cisco Unity Express EXEC mode. This command displays the
connection time, sender’s phone number, and the receiver’s phone number for all the incoming fax
sessions.
The following example is sample output for the show ccn call fax incoming command:
se-10-0-0-0> show ccn call fax incoming
Connect Time Sender Receiver
=======================================================================
Mon Jan 15 12:56:26 PST 2007 1111 5000
1 incoming fax call(s)
Terminating an Active Call
An active call can be terminated by using the call’s implementation ID or using the implementation ID
of the port through which the call came in to the system. Use the show ccn call route command to obtain
the call or port implementation ID. See “Displaying Active Calls by Route” on page 3.