Specifications

19-25
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 19 Advanced Configuration
Scheduling CLI Commands
• Commands in the block cannot use the comma “,” character or the delimiter character. For example,
if the delimiter character is configured to be “#”, then that character cannot be used in the command
blocks.
• Only system administrators can schedule the execution of blocks of commands.
• CLI commands are executed under system super-user privileges.
• Notification for the execution of these command blocks is not available. Error messages and results
are available in log files only.
Caution Use caution when scheduling CLI commands. Interactive commands will cause the execution to hang.
Some commands might cause system instability.
Prerequisites
Cisco Unity Express 8.0 or a later version
Required Data for This Procedure
None.
SUMMARY STEPS
1. kron schedule [name]
2. description
3. repeat every {number days at time |number weeks on day | number months on day date | number
years on month month} at time
Note Instead of the repeat every command, you can optionally use one of the following commands:
• repeat once at time
• repeat daily at time
• repeat monthly on day date at time
• repeat weekly on day at time
• repeat yearly on month month at time
4. start-date date
5. stop-date date
6. commands delimiter
7. exit
8. show kron schedules
9. show kron schedule detail job