Specifications

19-15
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 19 Advanced Configuration
Configuring Password and PIN Parameters
This feature enforces additional validations for a new PIN requested by a user. When the feature is not
enabled, a smaller set of validations is enforced.
Prerequisites
Cisco Unity Express 8.6.4 or a later version.
Required Data for This Procedure
None.
SUMMARY STEPS
1. config t
2. security pin trivialcheck
Validation
Enforced at all
times
Enforced when
PIN trivialcheck
enabled
PIN cannot contain any other characters other than digits from
0 to 9.
YY
PIN cannot contain digits less than the minimum length of PIN
configured.
YY
PIN cannot contain more than maximum length for PIN: 16
digits.
YY
Previous n number of PINs cannot be reused if history depth is
set to n.
YY
The PIN cannot match the numeric representation of the first
or last name of the user.
Y
The PIN cannot contain the primary or alternate phone
extensions of the user.
Y
The PIN cannot contain the reverse of the primary or alternate
phone extensions of the user.
Y
The PIN cannot contain groups of repeated digits, such as
"408408" or "123123."
Y
The PIN cannot contain only two different digits, such as
“121212.”
Y
A digit cannot be used more than two times consecutively, such
as “28883.”
Y
The PIN cannot be an ascending or descending group of digits,
such as “012345” or “987654.”
Y
The PIN cannot contain a group of numbers that are dialed in
a straight line on the keypad when the group of digits equals
the minimum credential length that is allowed. For example, if
3 digits are allowed, the user could not use “123,” “456,” or
“789” as a PIN.
Y