Specifications

CHAPTER
19-1
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
19
Advanced Configuration
This chapter describes advanced configuration procedures for modifying application parameters after
the initial installation and configuration process described in the “” section on page 1. That earlier
chapter includes commands not described in this chapter.
The advanced configuration procedures include:
• Configuring the Hostname, page 1
• Configuring the DNS Server, page 3
• Configuring NTP Servers, page 4
• Configuring a Syslog Server, page 8
• Configuring the Clock Time Zone, page 10
• Configuring Password and PIN Parameters, page 12
• Cisco Unified CME Password Synchronization in “Configuring Password and PIN Parameters” on
page 12
• PINless Voicemail in “Configuring Password and PIN Parameters” on page 12 and in “Displaying
Password and PIN System Settings” on page 23.
• Scheduling CLI Commands, page 24
Configuring the Hostname
During the software postinstallation process, the hostname was configured. Use this procedure to change
the hostname.
SUMMARY STEPS
1. config t
2. hostname hostname
3. exit
4. show hosts
5. copy running-config startup-config