Specifications

18-38
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 18 Configuring Advanced Voice Mail
Configuring Restriction Tables
Examples
To see sample output for the show restriction-table table-name command, see the “Examples” section
on page 37.
Configuring a Restriction Table
To configure a restriction table, you can set any of the following parameters or you can accept the default
values:
• Minimum digits
• Maximum digits
• Dial-string preference
Prerequisites
To use restriction tables with the following features, you must have Cisco Unity Express 3.0 or a later
version:
• Fax
• Live reply
• Message notification
• Nonsubscriber message delivery.
Required Data for This Procedure
None.
SUMMARY STEPS
1. config t
2. restriction table-name dial-string preference number pattern pattern-string
{allowed|disallowed} [insert]
3. restriction table-name min-digits num-of-digits
4. restriction table-name max-digits num-of-digits
5. end
6. (Optional) show restriction table [table-name | all]
Step 3
end
Example:
se-10-0-0-0(config)# end
Exits to privileged EXEC mode.
Step 4
show restriction table [table-name|all]
Example:
se-10-0-0-0# show restriction table live-reply
(Optional) Displays the specified restriction tables.
Command or Action Purpose