Specifications

18-18
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 18 Configuring Advanced Voice Mail
Configuring Live Reply
Required Data for This Procedure
This procedure requires the prepend digits (any additional digits that you want dialed before the
calling-number rule derived E.164 number for a remote subscriber).
SUMMARY STEPS
1. config t
2. voicemail live-reply enable
3. voicemail live-reply network-precedence {phonenumberE164 [calling-number-rule] |
calling-number-rule}
4. voicemail live-reply calling-number-rule {extension | prefix-extension | location-extension |
location-prefix-extension | prefix-location-extension}
5. voicemail live-reply restriction table-name
6. network location id ID_number
7. calling-number-rule prepend-digits digits
8. end
9. (Optional) show voicemail live-reply
10. (Optional) show network detail location id loc-id
11. (Optional) show voicemail live-reply restriction-table
DETAILED STEPS
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
voicemail live-reply enable
Example:
se-10-0-0-0(config)# voicemail live-reply enable
Enables the Live Reply feature on a system-wide
basis.