Specifications

18-2
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 18 Configuring Advanced Voice Mail
Configuring IMAP
Accessing voice-mail messages from general delivery mailboxes (GDMs) is not supported.
To access this feature, subscribers must be configured with the vm-imap privilege.
Note The Cisco Unity Express module cannot be used as an SMTP server for sending and receiving e-mails.
IMAP Server
The IMAP server must be enabled on Cisco Unity Express before the server allows e-mail clients to
connect. The feature can be enabled in the following modes:
• Non-SSL
Non-SSL is the least secure mode.
• SSL
• Mixed
This mode allows both SSL and non-SSL connections.
If you change the connection mode on the IMAP server, verify the configuration on the clients, which
may need to be changed to match the IMAP server configuration.
The maximum number of simultaneous IMAP connections is determined by the module type. See the
Release Notes for Cisco Unity Express for more information.
Any changes to the IMAP configuration require a restart of the IMAP server. You can restart the IMAP
server using the enable (IMAP) command-line interface (CLI) command or a graphical-user interface
(GUI) option.
E-mail Client Considerations
Table 18-1 lists the IMAP e-mail clients that are supported.
Table 18-1 IMAP Client Support
Cisco Unity Express Release:
IMAP Client 3.0 3.1 3.2 7.0 7.1 8.0/7.2 8.5/7.3 8.6/7.4
Iphone third party
clients
XXX
Cisco Mobile 8.0
(supported on
Iphone)
X
Cisco Unified
Personal
Communicator
(CUPC) 8.5
1
X