Specifications

13-16
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 13 Networking Cisco Unity Express
Adding Remote Subscribers to the Local Directory
se-10-0-0-0# remote username user4 fullname first User
se-10-0-0-0# remote username user4 fullname last 4
se-10-0-0-0#
Displaying Remote Subscribers
Several commands are available to display remote subscribers.
Displaying All Remote Subscribers
The following command displays all remote subscribers configured on the local system:
show remote users
The output for this command may appear similar to the following:
se-10-0-0-0# show remote users
user2
user5
user3
user4
Displaying a Specific Remote Subscriber
The following command displays the details for a specific remote subscriber:
show remote user detail username username
where username is the specific remote subscriber.
The output for this command may appear similar to the following:
se-10-0-0-0# show remote user detail username user2
Full Name: User 2
First Name: User
Last Name: 2
Nick Name:
Extension: 84444
Location Id: sjc
Deleting Remote Subscriber Information
Several commands are available to delete remote subscriber information from the local directory.
Deleting an Extension Number
The following configuration mode command deletes a remote subscriber’s extension number:
no remote username username phonenumber extension-number
where username is the name of the remote subscriber and extension-number is the remote subscriber’s
extension.
The following example deletes extension 75555 from remote subscriber User 2: