Specifications

13-10
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 13 Networking Cisco Unity Express
Downloading and Uploading Network Location Spoken Names
Examples
The following example displays the details for network location 15 with networking disabled:
se-10-0-0-0# config t
se-10-0-0-0(config)# network location id 15
se-10-0-0-0(config-location)# no enable
!!!WARNING!!!:Disabling location will disable
networking to/from this location.
Do you wish to continue[n]?:y
se-10-0-0-0(config-location)# end
se-10-0-0-0(config)# exit
se-10-0-0-0#
se-10-0-0-0# show network detail location id 15
Name: houston
Abbreviation: hou
Email domain: hou.mycompany.com
Minimum extension length: 2
Maximum extension length: 15
Phone prefix: 4
VPIM encoding: dynamic
Send spoken name: enabled
Send vCard: enabled
State: disabled
VPIM broadcast ID: vpim-broadcast
Sent msg count: 1
Received msg count: 1
The following example re-establishes voice-mail transmission to and from network location 15.
se-10-0-0-0# config t
se-10-0-0-0(config)# network location id 15
se-10-0-0-0(config-location)# enable
se-10-0-0-0(config-location
Downloading and Uploading Network Location Spoken Names
Use the Administration via Telephone (AvT) options to record the spoken names. You can download
these spoken names from a Cisco Unity Express module to an external server or upload them from an
external server to a Cisco Unity Express module.
The following sections describe this feature:
Step 5
end
Example:
se-10-0-0-0(config-location)# end
se-10-0-0-0(config)#
Exits location configuration mode.
Step 6
exit
Example:
se-10-0-0-0(config)# exit
se-10-0-0-0#
Exits configuration mode.
Command or Action Purpose