Specifications

13-9
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 13 Networking Cisco Unity Express
Disabling a Network Location
124 VPIM 16:34:28 1 andy [e-mail]
125 VPIM 16:34:57 1 andy [e-mail]
126 VPIM 16:35:43 1 andy [e-mail]
Disabling a Network Location
Cisco Unity Express supports disabling a location in the Cisco Unity Express network from sending or
receiving Cisco Unity Express voice-mail messages. The system does not delete the network location
from the Cisco Unity Express database.
To reestablish voice-mail message transmission to and from the network location, use the enable
command.
Note Deleting the e-mail domain for a network location also disables the location.
SUMMARY STEPS
1. config t
2. network location id location-id
3. no enable
4. y
5. end
6. exit
DETAILED STEPS
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
se-10-0-0-0(config)#
Enters configuration mode.
Step 2
network location id location-id
Example:
se-10-0-0-0(config)# network location id 15
Enters the location configuration mode for network
location location-id.
Step 3
no enable
Example:
se-10-0-0-0(config-location)# no enable
!!!WARNING!!!:Disabling location will disable
networking to/from this location.
Do you wish to continue[n]?:
Disables the network location location-id from
sending or receiving voice-mail messages.
Step 4
Enter yes to disable the location.
—