Specifications

13-4
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 13 Networking Cisco Unity Express
Configuring Network Locations
• (Optional) Voice-mail spoken name capability—Enabling this functionality permits receipt of a
voice-mail originator’s spoken name, which is played at the beginning of the received voice-mail
message.
• (Optional) Broadcast VPIM ID—Used for sending and receiving broadcast messages between
network locations. See
“Configuring the Broadcast Message VPIM ID for a Network Location” on
page 23 for more information.
• (Optional) Secure Messaging—Used for supporting secure messaging. Supported in Cisco Unity
Express 8.6 and later versions. See the
“Configuring Secure Messaging” section on page 33 for more
information.
• Location ID for the local system.
SUMMARY STEPS
1. config t
2. network location id number
3. (Optional) name location-name
4. (Optional) abbreviation name
5. email domain domain-name
6. (Optional) voicemail phone-prefix digit string
7. (Optional) voicemail extension-length number [min number | max number]
8. (Optional) voicemail vpim-encoding {dynamic | G711ulaw | G726}
9. (Optional) voicemail spoken-name
10. (Optional) voicemail secure-messaging
11. end
12. Repeat Steps 2 through 11 for each remote location.
13. network local location id number
14. end
15. show network locations
16. show network detail location id number
17. show network detail local
18. show network queues