Specifications

12-32
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 12 Configuring Message Notification
Cascading Message Notification
5. [username | groupname] [user-id | group-id] notification cascade-to user-id after minutes
6. (Optional) show voicemail notification
7. (Optional) show voicemail notification owner owner-id profile
8. (Optional) show voicemail msg-notification restriction-table
DETAILED STEPS
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
voicemail notification cascading enable
Example:
se-10-0-0-0(config)# voicemail notification
cascading enable
Enables the message notification cascading feature at
the system level.
Step 3
voicemail msg-notification restriction-table
table-name
Example:
se-10-0-0-0(config)# voicemail msg-notification
restriction-table msg-notifc-r-table
Associates a restriction table with the message
notification feature:
Step 4
end
Example:
se-10-0-0-0(config)# end
Returns to privileged EXEC mode.
Step 5
[username | groupname] [user-id | group-id]
notification cascade-to user-id after minutes
Example:
se-10-0-0-0# [username | groupname] user2
notification cascade-to user4 after 10
Defines a rule for cascading the notification. This
command takes three inputs
• ID of the user/group for whom cascading is to be
configured
• ID of the user to which to cascade
• Time after which to cascade the notification
Step 6
show voicemail notification
Example:
se-10-0-0-0# show voicemail notification
(Optional) Displays the status of the notification
cascading feature.