Specifications

12-31
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 12 Configuring Message Notification
Cascading Message Notification
This can be done by either disabling cascaded notifications that they receive from a specified
mailbox, or by disabling the notification feature in their profile.
• You can configure a maximum of two notification cascade rules for each subscriber.
• If two notification cascade rules are configured for the same subscriber, the target ID and the time
for the two rules must be unique.
• Notification cascading does not occur for private messages and broadcast messages.
• When a notification is cascaded to a target subscriber, all active devices in the target subscriber’s
profile receive the notification.
• For numeric pagers, the notification is the same as a regular notification.
You cannot differentiate between a cascaded notification and a regular notification.
• For e-mail and text pager, the cascaded notification format is the same as a regular notification, but
you can use the Message For: field to identify a cascaded notification e-mail.
In a regular notification, this field contains the user’s own extension or ID, but in a cascaded
notification it contains a different extension or user ID.
• The behavior of cascading notification is based on the target subscriber’s message notification
profile.
For example, if:
– User-A has notification configured to cascade all the urgent messages to User-B.
– User-B has notification configured for all the messages.
The message notification cascading is generated for all the messages and not just the urgent
messages received in User-A’s mailbox.
• This feature is not available in Cisco VoiceView Express.
Configuring Cascading Message Notification
Prerequisites
• Cisco Unity Express 3.0 or a later version
• You must enable this feature at the system level.
• If you want to restrict specified extensions from using this feature, you must configure a restriction
table as described in the
“Configuring Restriction Tables” section on page 32.
Required Data for This Procedure
This procedure requires the IDs of the users and groups to which you want to cascade the notifications.
SUMMARY STEPS
1. config t
2. voicemail notification cascading enable
3. voicemail msg-notification restriction-table table-name
4. end