Specifications

12-21
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 12 Configuring Message Notification
Configuring Message Notification for Devices
Examples
The following is sample output for the show voicemail notification owner command.
se-10-0-0-0# show voicemail notification owner user5 profile
Message notification: enabled
Profile: vm-notif-profile
The following is sample output for the show voicemail notification owner num-pager command.
se-10-0-0-0# show voicemail notification owner techs num-pager
Profile: vm-notif-profile
Device: num-pager
Enabled: yes
Preference: urgent
Phone/Email: 912225550180
Extra Digits: 8282
Schedule (active hours):
Sunday Inactive all day
Monday 08:00 to 17:00
Tuesday Inactive all day
Wednesday 08:00 to 12:00, 13:30 to 20:00
Thursday Inactive all day
Friday 08:00 to 15:00
Saturday Inactive all day
Configuring Message Notification for E-mail
Use this procedure to configure message notification for a subscriber or group e-mail inbox.
Prerequisites
Enable the message notification capability for the subscriber or group. See “Enabling Message
Notification for a Subscriber or Group” on page 12.
Required Data for This Procedure
• E-mail address
• Status of attaching voice messages to e-mail notifications
• Message text
• Notification preference
• Days and times when notification is active
SUMMARY STEPS
1. username username profile vm-notif-profile email address email-address
or
groupname groupname profile vm-notif-profile email address email-address
2. username username profile vm-notif-profile email enable
or