Specifications

12-17
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 12 Configuring Message Notification
Configuring Message Notification for Devices
Examples
The following is sample output for the show voicemail notification owner command.
se-10-0-0-0# show voicemail notification owner user3 profile
Message notification: enabled
Profile: vm-notif-profile
The following is sample output for the show voicemail notification owner cell-phone command.
se-10-0-0-0# show voicemail notification owner user3 cell-phone
Profile: vm-notif-profile
Device: cell-phone
Enabled: yes
Preference: all
Phone/Email: 912225550150
Extra Digits: 1234
Schedule (active hours):
Sunday Inactive all day
Monday 08:00 to 11:30, 13:00 to 17:30
Tuesday 08:00 to 15:00
Wednesday Inactive all day
Thursday Inactive all day
Friday 09:00 to 13:30
Saturday Inactive all day
Configuring Message Notification for a Numeric Pager
Use this procedure to configure message notification for a subscriber or group numeric pager.
Prerequisites
Enable the message notification capability for the subscriber or group. See “Enabling Message
Notification for a Subscriber or Group” on page 12.
Required Data for This Procedure
• Phone number
• Extra digits, if any
• Notification preference
• Days and times when notification is active
SUMMARY STEPS
1. username username profile vm-notif-profile num-pager phonenumber phonenumber
or
groupname groupname profile vm-notif-profile num-pager phonenumber phonenumber
2. (Optional) username username profile vm-notif-profile num-pager extra-digits digits
or
(Optional) groupname groupname profile vm-notif-profile num-pager extra-digits digits