Specifications

12-13
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 12 Configuring Message Notification
Configuring Message Notification for Devices
voicemail notification owner owner-id enable
where owner-id is the username of the subscriber or groupname of the group that requires the message
notification capability.
The following example enables message notification for the subscriber user5 and the group
sales:
se-10-0-0-0# config t
se-10-0-0-0(config)# voicemail notification owner user5 enable
se-10-0-0-0(config)# voicemail notification owner sales enable
se-10-0-0-0(config)# end
se-10-0-0-0#
Now configure message notification on one or more devices for the subscriber or group.
Configuring Message Notification for Devices
The following procedures configure the devices for message notification:
• Configuring Message Notification for Phone Devices, page 13
• Configuring Message Notification for a Numeric Pager, page 17
• Configuring Message Notification for E-mail, page 21
• Configuring Message Notification for a Text Pager, page 26
Configuring Message Notification for Phone Devices
Use this procedure to configure message notification for a subscriber or group phone device.
Prerequisites
Enable the message notification capability for the subscriber or group. See “Enabling Message
Notification for a Subscriber or Group” on page 12.
Required Data for This Procedure
• Phone number
• Extra digits, if any
• Notification preference
• Days and times when notification is active
SUMMARY STEPS
1. username username profile vm-notif-profile {cell-phone | home-phone | work-phone}
phonenumber phonenumber
or
groupname groupname profile vm-notif-profile {cell-phone | home-phone | work-phone}
phonenumber phonenumber