Specifications

12-12
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 12 Configuring Message Notification
Enabling Message Notification for a Subscriber or Group
Examples
The following is sample output for the show voicemail notification command.
se-10-0-0-0# show voicemail notification
Message Notification: enabled
Notification Preference: all
Connection Timeout: 60 seconds
Login to VoiceMail allowed: no
Attach voice message: yes
The following is sample output for the show voicemail notification restriction-table command.
se-10-0-0-0# show voicemail notification restriction-table
Restriction table: msg-notification
Minimum digits allowed: 5
Maximum digits allowed: 18
Dial-Strings:
Preference Call Pattern Allowed
1 91222* Yes
2 * No
The following is sample output for the show smtp server command.
se-10-0-0-0# show smtp server
SMTP Server: 172.16.1.1
Authentication: Required
Username: smtp123
The following is sample output for the show voicemail configuration command:
se-10-0-0-0# show voicemail configuration
Outgoing Email From-Address: [e-mail]
Enabling Message Notification for a Subscriber or Group
Before configuring message notification on a device for a subscriber or group, enable the message
notification capability for the subscriber or group.
Starting in Cisco Unity Express configuration mode, use the following command to enable message
notification:
Step 13
show smtp server
Example:
se-10-0-0-0# show smtp server
Displays the SMTP server settings.
Step 14
show voicemail configuration
Example:
se-10-0-0-0# show voicemail configuration
Displays the From address for outgoing
e-mail messages.
Command or Action Purpose