Specifications

12-2
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 12 Configuring Message Notification
Message Notification Settings
A notification profile contains the configuration settings for each subscriber or group. See “Notification
Profile” on page 2 for more information about the notification profile.
Configuring the message notification features requires setting several system-wide parameters. See
“System-Wide Message Notification Settings” on page 2 for the procedure to set these parameters.
Sending and receiving message notifications differs by device type. See “Sending and Receiving
Message Notifications” on page 7 for a description of these processes.
After configuring the system-wide parameters, configure the parameters for the subscribers and groups
who will have access to the message notification feature. See “Configuring Message Notification for
Devices” on page 13 for these procedures.
Notification Profile
Cisco Unity Express provides a default notification profile for each subscriber and group that has a voice
mailbox. The notification profile contains configuration information for message notification, such as a
device type, phone number or e-mail address, notification preference, and notification schedule. Each
subscriber or group can have one or more of the supported devices configured in the notification profile.
After the profile information is configured, the subscriber or group will receive message notifications.
The default profile name is vm-notif-profile. This name cannot be changed or deleted.
Message Notification Settings
Configuring Message Notification requires the following procedures:
• Configuring system-wide settings
– For an overview of system-wide notification settings, see System-Wide Message Notification
Settings below.
– For configuration procedures for system-side notification settings, see Configuring
System-Wide Settings, page 9.
• Configuring subscriber- and device-specific settings
– For an overview of subscriber and device-specific settings, see Subscriber and Device-Specific
Settings, page 5.
– For configuration procedures for subscriber- and device-specific settings, see Enabling Message
Notification for a Subscriber or Group, page 12. and Configuring Message Notification for
Devices, page 13.
System-Wide Message Notification Settings
Message notifications for the whole system use the following settings:
• Enabling the feature—Message notification is disabled by default for all subscribers and groups.
Enable the feature on a system-wide basis or for specific subscribers or groups. The feature is
available for all subscribers and groups who have a mailbox.
The first time the administrator enables the feature system-wide, the feature remains disabled for all
subscribers and groups. If specific subscribers or groups are to have access to message notification,
the administrator can enable the feature for those subscribers or groups on an individual basis.