Specifications

11-4
Cisco Unity Express Voice-Mail and Auto-Attendant CLI Administrator Guide for 3.0 and Later Versions
OL-14010-09
Chapter 11 Configuring VoiceView Express
Configuring VoiceView Express
DETAILED STEPS
Examples
The following is sample output for the show voiceview configuration command:
se-10-0-0-0# show voiceview configuration
Phone service URL: http://<CUE-hostname>/voiceview/common/login.do
Enabled: Yes
Idle Timeout (minutes): 10
Command or Action Purpose
Step 1
config t
Example:
se-10-0-0-0# config t
Enters configuration mode.
Step 2
service voiceview
Example:
se-10-0-0-0(config)# service voiceview
Enters VoiceView Express configuration mode.
Step 3
enable
Example:
se-10-0-0-0(config-voiceview)# enable
Enables the VoiceView Express feature for all the
subscribers served by the Cisco Unity Express system.
The default state is enabled.
Step 4
session idletimeout minutes
Example:
se-10-0-0-0(config-voiceview)# session
idletimeout 10
Specifies the number of minutes a VoiceView Express
session can be idle. After this maximum is reached, the
system automatically disconnects the session. Valid
values are 5 to 30 minutes. The default is 5 minutes.
Step 5
end
Example:
se-10-0-0-0(config-voiceview)# end
Exits VoiceView Express configuration mode.
Step 6
end
Example:
se-10-0-0-0(config)# end
Exits configuration mode.
Step 7
show voiceview configuration
Example:
se-10-0-0-0# show voiceview configuration
(Optional) Displays the VoiceView Express
configuration parameters.
Step 8
show voiceview sessions
Example:
se-10-0-0-0# show voiceview sessions
(Optional) Displays all active VoiceView Express
sessions.